Pppoe Commands - THOMSON 516 Reference Manual

PPPoE Commands

Introduction
This chapter describes the commands of the pppoe command group.
Contents
This chapter covers the following commands:
pppoe flush Flush the current PPPoE configuration.
pppoe ifadd Create a new PPPoE interface.
pppoe ifattach Attach a PPPoE interface.
pppoe ifconfig Configure a PPPoE interface.
pppoe ifdelete Delete a PPPoE interface.
pppoe ifdetach Detach a PPPoE interface.
pppoe iflist Show current configuration of all or a specified PPPoE interface(s).
pppoe ifscan Scan a PPPoE interface for available Access Concentrator names and Service
Names.
pppoe rtadd Automatically add a route configuration to the routing table.
pppoe rtdelete Delete the route specification for a PPPoE link.
pppoe relay add Add an Ethernet port to the PPPoE relay list.
pppoe relay delete Delete an Ethernet port from the PPPoE relay agent list.
pppoe relay flush Remove all Ethernet ports from the PPPoE relay agent list and terminate all
sessions.
pppoe relay portlist List all Ethernet ports added to the PPPoE relay agent list.
pppoe relay sesslist List all active PPPoE relay sessions.
E-DOC-CTC-20040907-0010 v1.0
PPPoE Commands
286
287
288
289
293
294
295
296
297
299
300
301
302
303
304
285