Eth Iflist - THOMSON 516 Reference Manual

Eth Commands

eth iflist

Show the Ethernet port configuration and current operating status.
SYNTAX:
eth iflist
EXAMPLE:
The example below is for a SpeedTouch
=>eth iflist
Intf Type
1 auto
=>
The example below is for a SpeedTouch
=>eth iflist
Intf Type
1 auto
2 auto
3 auto
4 auto
=>
DESCRIPTION:
Type: Indicates the configured Ethernet communication speed and duplex mode.
Result type: Indicates the effective operating status if
types do NOT match,
RELATED COMMANDS:
eth ifconfig
144
TM
516:
Result Type
100BaseTFD
TM
546:
Result Type
100BaseTFD
100BaseTFD
Not connected
100BaseTFD
Result Type will equal unknown
Configure the Ethernet port.
Type equals auto. In other cases, when the Ethernet
and no Ethernet connectivity will exist.
E-DOC-CTC-20040907-0010 v1.0