Ipoa Ifconfig - THOMSON 516 Reference Manual

ipoa ifconfig

Configure an IPoA interface.
SYNTAX:
ipoa ifconfig intf = <string>
[dest = <string>]
[qos = <string>]
[encaps = <{llc/snap | vcmux}>]
[retry = <number {0-65535}>]
where:
intf The name of the IPoA interface to be configured.
dest The destination for this interface. Typically a phonebook entry.
Note
This parameter needs only to be specified in case of an interface created
without specified destination.
qos The name of a configured Quality of Service book (qosbook) entry.
If not specified, the default qosbook entry will be used.
encaps The type of encapsulation to be used for this bridge interface.
Choose between:
llc/snap (Logical Link Control (LLC)/Sub Network Access Protocol (SNAP)
vcmux (Virtual Channel MUltipleXing).
retry A number between 0 and 65535.
Represents the number of WAN connection setup retries before giving up.
The default is 10.
EXAMPLE:
=>ipoa iflist
IPoA_PVC1 : dest : Br4
Retry : 10
Connection State : connected
=>ipoa ifconfig intf=IPoA_PVC1 encaps=llc/snap retry=15
=>ipoa iflist
IPoA_PVC1 : dest : Br4
Retry : 15
Connection State : connected
RX bytes: 0
TX bytes: 0
=>
E-DOC-CTC-20040907-0010 v1.0
QoS : default Encaps : llc/snap
QoS : default Encaps : llc/snap
frames: 0
frames: 0 dropframes: 0
IPoA Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
Fcs : off
Fcs : off
209