Config Load - THOMSON 516 Reference Manual

Config Commands

config load

Load complete saved (backup) or default configuration file.
Use the command :config flush before loading a configuration file.
SYNTAX:
config load
where:
load_ip Load IP settings (enabled) or not (disabled).
Note
defaults Load default configuration (enabled) or saved configuration (disabled).
Note
flush Flush the current configuration before loading a new configuration (enabled) or not
(disabled).
echo Echo each command string when loaded (enabled) or not (disabled).
filename Name of the configuration file to be loaded.
EXAMPLE:
=>ip rtlist
Destination
10.0.0.0/24
172.16.0.5/32
10.0.0.140/32
127.0.0.1/32
172.16.0.0/24
=>config load flush_ip=no
=>ip rtlist
Destination
10.0.0.0/24
10.0.0.140/32
127.0.0.1/32
=>config load flush=yes
=>ip rtlist
Destination
10.0.0.0/24
10.0.0.140/32
172.16.0.5/32
127.0.0.1/32
172.16.0.0/24
=>
RELATED COMMANDS:
config list
config save
72
[load_ip = <{enabled | disabled}>]
[defaults = <{enabled | disabled}>]
[flush = <{enabled | disabled}>]
[echo = <{disabled | enabled}>]
[filename = <string>]
Not keeping the IP settings could cause lost IP connectivity in the LAN.
If not specified, the saved configuration will be loaded.
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 172.16.0.5
0.0.0.0/0 10.0.0.140
0.0.0.0/0 127.0.0.1
0.0.0.0/0 172.16.0.5
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 10.0.0.140
0.0.0.0/0 127.0.0.1
Source Gateway
10.0.0.0/24 10.0.0.140
0.0.0.0/0 10.0.0.140
0.0.0.0/0 172.16.0.5
0.0.0.0/0 127.0.0.1
0.0.0.0/0 172.16.0.5
Show the current configuration set.
Store the current configuration in a backup file.
Intf Mtrc
eth0 0
cip1 0
eth0 0
loop 0
cip1 1
Intf Mtrc
eth0 0
eth0 0
loop 0
Intf Mtrc
eth0 0
eth0 0
cip1 0
loop 0
cip1 1
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20060414-0002 v1.0