Ip Traceroute - THOMSON 516 Reference Manual

IP Commands

ip traceroute

Send ICMP/UDP packets to trace the ip path.
SYNTAX:
ip traceroute
where:
addr The destination IP address.
count A number between 1 and 10.
Represents the number of times to reissue a traceroute request with the same TTL.
The default is 3.
size A number between 1 and 20000 (bytes).
Represents the size of the traceroute packet(s).
The default is 1.
interval A number between 100 and 10000000 (milliseconds).
Represents the intermediate interval between two packets.
The default is 1000.
maxhops A number between 1 and 255.
Represents the upper limit on the number of routers through which a packet can
pass.
The default is 30.
dstport A number between 1 and 65535.
Represents the UDP destination port number to send to.
maxfail A number between 0 and 255.
Represents the maximum number of consecutive timeouts allowed before
terminating a traceroute request.
The default is 5.
type The type of traceroute packet(s).
Choose between:
The default is ICMP.
utime Display time in useconds (yes) or not (no).
The default is yes.
196
addr = <ip-address>
[count = <number{1-10}>]
[size = <number{1-20000}>]
[interval = <number{1000-60000}>]
[maxhops = <number{1-255}>]
[dstport = <number{1-65535}>]
[maxfail = <number{0-255}>]
[type = <{icmp | udp}>]
[utime = <{no | yes}>]
icmp
udp.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0