Dhcp Commands - THOMSON 516 Reference Manual

DHCP Commands

Introduction
This chapter describes the commands of the dhcp command group.
Contents
This chapter covers the following commands:
dhcp client clear
dhcp client config
dhcp client flush
dhcp client ifadd
dhcp client ifattach
dhcp client ifconfig
dhcp client ifdelete
dhcp client iflist
dhcp client ifrelease
dhcp client ifrenew
dhcp client stats
dhcp relay add
dhcp relay config
dhcp relay delete
dhcp relay flush
dhcp relay ifconfig
dhcp relay iflist
dhcp relay list
dhcp relay stats
dhcp server clear
dhcp server config
dhcp server flush
dhcp server policy
dhcp server stats
dhcp server lease add
dhcp server lease delete
dhcp server lease flush
dhcp server lease list
dhcp server pool add
dhcp server pool config
dhcp server pool delete
dhcp server pool flush
dhcp server pool list
E-DOC-CTC-20040907-0010 v1.0
Clear Dynamic Host Configuration Protocol (DHCP) client statistics.
Show/set DHCP client configuration.
Flush complete DHCP client configuration and dynamic interfaces.
Create a DHCP lease for a specific interface.
Attach a DHCP lease to a dynamic interface.
Show/set the configuration of DHCP lease created for a specific interface.
Delete a dynamic interface.
Show all dynamic interfaces.
Release a lease attached to a dynamic interface.
Renew the lease of a dynamic interface.
Show DHCP client statistics.
Add a DHCP server to the DHCP server list.
Set the relay configuration settings.
Delete a DHCP server from the DHCP server list.
Flush the DHCP relay settings.
Configure a relay interface.
Show the configuration of the relay interfaces.
Show the DHCP server list.
Show the DHCP relay statistics.
Clear the DHCP server statistics.
Show/set the DHCP server configuration settings.
Flush all the DHCP server pool and lease entries.
Show/set the DHCP server policy.
Show the DHCP server statistics.
Assign a DHCP server lease to a DHCP host in the local network.
Delete a DHCP lease.
Flush the complete DHCP server configuration and dynamic leases.
List the current DHCP leases.
Add a DHCP server pool.
Configure an existing DHCP server pool.
Delete a DHCP server pool.
Flush all the DHCP server pools.
List the current DHCP server pools.
DHCP Commands
76
77
78
79
80
81
83
84
85
87
89
90
91
92
93
94
95
96
97
98
99
100
101
102
104
105
106
107
108
109
111
112
113
75