THOMSON 516 Reference Manual page 240
Multi-user adsl gateways
Hide thumbs
Also See for 516:
- Reference manual (710 pages) ,
- User manual (116 pages) ,
- Setup and user manual (84 pages)
Table of Contents
Advertisement
Label Commands
prot
The protocol (name or number) expected in the IP packet.
Select one of the following protocol names:
or, alternatively, specify the protocol number.
srcport
The TCP/UDP port (or beginning of range) the packet is coming from.
Select one of the supported TCP/UDP port names (see
Names" on page
srcportend
The source TCP/UDP port range end (inclusive) (only applicable for ranges).
Select one of the supported TCP/UDP port names (see
Names" on page
dstport
The TCP/UDP port (or beginning of range) the packet is going to.
Select one of the supported TCP/UDP port names (see
Names" on page
dstportend
The destination TCP/UDP port range end (inclusive) (only applicable for ranges).
Select one of the supported TCP/UDP port names (see
Names" on page
clink
The name of the chain to be parsed when this rule applies.
log
Logging is done when this rule applies.
Choose between no or yes.
label
Choose between:
RELATED COMMANDS:
label rule delete
label rule list
238
icmp
igmp
ipinip
tcp
udp
ah
esp
ipcomp
375) or, alternatively, specify the port number.
375) or, alternatively, specify the port number.
375) or, alternatively, specify the port number.
375) or, alternatively, specify the port number.
None
link (when clink is used)
label name.
Delete a rule.
Show a list of rules.
" Supported TCP/UDP Port
" Supported TCP/UDP Port
" Supported TCP/UDP Port
" Supported TCP/UDP Port
E-DOC-CTC-20040907-0010 v1.0
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
REQUIRED
Advertisement
Table of Contents
