THOMSON 516 Reference Manual page 294

PPPoE Commands
unnumbered
EXAMPLE:
=>pppoe iflist
myPPPoE: dest : myETHoA
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0
auth = auto
admin state = down
LCP : state = initial
IPCP: state = initial
acname : ---
=>
292
Takes the local IP address from the
address pool assigned to the incoming PPPoE link (on) or not (off).
The default is off.
Note
In case the unnumbered parameter is disabled, the same IP address is
used for each connection on the server side, thus reducing the number
of used IP addresses.
[00:00:00]
mru = 1492
user = johndoe password = ********
oper state = down
retransm = 10
retransm = 0
service : ---
laddr
field and remote IP address from the IP
link state = not-connected
term. reason =
term. reason =
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0