Phonebook Add - THOMSON 516 Reference Manual

Phonebook Commands

phonebook add

Add a phonebook entry.
SYNTAX:
phonebook add
where:
name The name of the new phonebook entry. Two limitations apply:
The name of a phonebook entry intended for the Relayed PPPoA (PPPoA-to-PPTP
Relaying) packet service may not start with capital P or capital T
The name of a phonebook entry intended for the PPP-to-DHCP spoofing packet
service must start with DHCP, for example 'DHCP_Spoof01'.
addr The ATM address for this destination.
It is composed of a VPI and a VCI identifying ATM virtual channels.
In most cases the values are provided by the Service Provider.
Accepted VPI: a number between 0 and 15
Accepted VCI: a number between 0 and 511.
type The Connection Service supported by the destination.
Choose between:
any: All Packet Services
ethoa: Bridged Ethernet, Routed Ethernet, Bridged PPPoE and Routed PPPoE
pppoa: Routed PPPoA and Relayed PPPoA
ipoa: Classical IPoA and Routed IPoA.
EXAMPLE:
=>phonebook list
Name Type
PVC1 any
Br4 ethoa
CIPPVC3 ipoa
=>phonebook add name=PVC_Test addr=8.68 type=pppoa
=>phonebook list
Name Type
PVC1 any
Br4 ethoa
CIPPVC3 ipoa
PVC_Test pppoa
=>
The usb_port phonebook entry is only applicable in case of a SpeedTouch
!
Do not change this entry in any way. Do not delete this entry from the phonebook!
RELATED COMMANDS:
phonebook delete
phonebook list
266
name = <string>
addr = <atmchannel : PVC syntax is [port.]vpi.vci
port=dsl0 | dsl1 | ...>
type = <{any | ethoa | pppoa | ipoa}>
Use Address
1 8.35
0 8.38
1 8.82
Use Address
1 8.35
0 8.38
1 8.82
0 8.68
Remove a phonebook entry.
Show the current phonebook.
REQUIRED
REQUIRED
REQUIRED
TM
536 variant.
E-DOC-CTC-20040907-0010 v1.0