System Config - THOMSON 516 Reference Manual

system config

TM
Show/set SpeedTouch system configuration parameters.
For a good operation of UPnP and the discovery mechanism, it is highly recommended not to change the
!
system config settings.
SYNTAX:
system config [upnp = <{disabled | enabled}>]
[mdap = <{disabled | enabled}>]
[drst = <{disabled | enabled}>]
[led = <{green | red | orange | flash | off}>]
[digestauth = <{disabled | enabled}>]
[strictusername = <{disabled | enabled}>]
[dcache = <{disabled | enabled}>]
where:
upnp Enable or disable UPnP discovery.
The default is enabled.
mdap Enable or disable proprietary discovery protocol.
The default is enabled.
drst Enable or disable DrSpeedTouch access. The default is enabled.
led Set the SpeedTouch
green: solid green
red: solid red
orange: solid orange
flash: toggle between green and orange
off: LED is off.
The default is green.
digestauth Enable or disable HTTP digest authentication.
The default is disabled.
strictusername Enable or disable strict username check.
The default is disabled.
dcache Enable or disable data cache.
The default is enabled.
Note
EXAMPLE:
=>system config
upnp discovery : enabled
mdap discovery : enabled
drst support : enabled
digest authentication : disabled
strict username : disabled
=>
E-DOC-CTC-20040907-0010 v1.0
TM
system LED color. Choose between:
For internal use only. Do NOT alter in any way.
System Commands
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
347