Nat Defserver - THOMSON 516 Reference Manual

NAT Commands

nat defserver

Define the default NAT/PAT server.
This server will handle all incoming calls.
In typical LAN configurations, one local 'default' server will be responsible for all WAN-LAN mail, http, ftp, ...
connectivity. This command allows to specify this server. For specific services, use the command :nat create.
SYNTAX:
nat defserver
where:
addr The IP address of the server (on the 'inside') that will receive all (unknown) incoming
packets.
Note
EXAMPLE:
=>nat defserver
Default server is undefined
=>nat defserver addr=10.0.0.1
=>nat defserver
Default server is 10.0.0.1
=>
254
[addr = <ip-address>]
If not specified, the current default server is shown.
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0