System Config - THOMSON SpeedTouch 585 Reference Manual

System Commands

system config

Set/change the system configuration parameters.
For a good operation of UPnP and the discovery mechanism, it is highly recommended not to change the
!
system configuration settings.
SYNTAX:
system config
where:
upnp
mdap
drst
led
resetbutton
digestauth
defaultconnection
rtc
570
[upnp = <{disabled | enabled}>]
[mdap = <{disabled | enabled}>]
[drst = <{disabled | enabled}>]
[led = <{green | red | orange | flash | off}>]
[resetbutton = <{disabled | enabled}>]
[digestauth = <{disabled | enabled}>]
[defaultconnection = <{Internet | LocalNetwork}>]
[rtc = <{disabled|enabled}>]
Enable or disable UPnP discovery.
The default is enabled.
Enable or disable proprietary discovery protocol.
The default is enabled.
Enable or disable DrSpeedTouch access.
The default is disabled.
Set the system LED colour.
Choose between:
green: solid green
red: solid red
orange: solid orange
flash: toggle between green and orange
off: LED is off.
The default is green.
Enable or disable reset-to-factory-defaults pushbutton.
The default is enabled.
Enable or disable HTTP digest authentication.
The default is enabled.
The name of the default internet connection.
Enable or disable RTC.
The default is disabled
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20050531-0058 v1.0