Access Via Ftp - THOMSON 716 User Manual

Chapter 1
Your SpeedTouch™

1.3.3 Access via FTP

File Transfer Protocol
File system
FTP session
File system structure
14
You can access the file system of the SpeedTouch™ via the File Transfer Protocol
(FTP) (FTP), in order to:
Restore or backup configuration files, templates or language packs.
Upgrade your configuration.
The SpeedTouch™ file system is stored on nonvolatile memory, and contains the
SpeedTouch™ software, service template files and (optionally) default setting files.
To open an FTP session:
Open a Command Prompt window.
1
In Windows XP for instance:
1
2
At the prompt, type
2
(default is 192.168.1.254).
Enter your SpeedTouch™ security user name and password.
3
The default user is 'Administrator' and the default password is blank.
The example below shows an FTP session to the SpeedTouch™ file system.
4
The structure of the file system is very simple: It consists of a single root directory
called and a subdirectory called dl.
root
The directory contains:
root
all the necessary files for the SpeedTouch™ to boot correctly
the dl directory
The (download) directory contains the software image.
dl
If you made changes to the SpeedTouch™ configuration and saved
them, a user.ini configuration settings file is created in the
subdirectory.
On the Windows task bar, click Start.
Select (All) Programs > Accessories > Command Prompt.
followed by the IP address of your SpeedTouch™
ftp
dl
E-DOC-CTC-20050803-0002 v2.0