NAT Commands
Introduction
This chapter describes the commands of the nat command group.
Contents
This chapter covers the following commands:
nat config
Display/modify global NAT configuration options.
nat flush
Flush the current NAT configuration.
nat ifconfig
Modify address translation on an IP interface.
nat iflist
Display the address translation configuration on all the interfaces.
nat mapadd
Add an address mapping to a Network Address Translation (NAT) enabled interface.
nat mapdelete
Delete an address mapping from a NAT enabled interface.
nat maplist
Display the address mapping for a NAT enabled interface.
nat tmpladd
Add an address mapping template.
nat tmpldelete
Delete an address mapping template.
nat tmpllist
Display the address mapping templates.
nat tmplinst
Instantiate address mapping templates for a given dynamic address.
E-DOC-CTC-20060414-0002 v1.0
NAT Commands
508
509
510
511
512
515
516
517
520
521
522
507