Dhcp Server Pool Config - THOMSON TG587n Reference Manual

dhcp Commands

dhcp server pool config

Configure a DHCP server pool
SYNTAX:
dhcp server pool config
where:
name
state
intf
index
poolstart
poolend
netmask
gateway
server
primdns
E-DOC-CTC-20080619-0003 v1.0
name = <{LAN_private}>
[state = <{disabled|enabled}>]
[intf = <{Internet|LocalNetwork}>]
[index = <number>]
[poolstart = <ip-address>]
[poolend = <ip-address>]
[netmask = <ip-mask(dotted or cidr)>]
[gateway = <ip-address|0|none>]
[server = <ip-address|none>]
[primdns = <ip-address|none>]
[secdns = <ip-address|none>]
[dnsmetric = <number{0-100}>]
[primwins = <ip-address|none>]
[secwins = <ip-address|none>]
[leasetime = <number{0-1814400}>]
[renewtime = <number{0-1814400}>]
[rebindtime = <number{0-1814400}>]
[unnumbered = <{disabled|enabled}>]
[localgw = <{disabled|enabled}>]
The name of the DHCP server pool.
Enable/Disable the DHCP server pool admin
state.
The interface for which the pool is allowed to
lease IP addresses.
The number of the pool before which you want
the new pool to be added.
The DHCP server pool start IP address.
The DHCP server pool end IP address.
The DHCP server pool netmask.
The IP address of the default router for DHCP
clients.
The IP address of the DHCP server for DHCP
clients.
The IP address of the primary DNS server for
DHCP clients.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
173