Dv Mode Programming; Call Sign Programming; "My" (Your Own Call Sign) Programming; Programming A Call Sign - Icom IC-9100 Instruction Manual

7

DV MODE PROGRAMMING

The optional UT-121 is required for DV mode opera-
tion.
sign) "UR" (destination call sign, whether it is an indi-
vidual or a repeater.) "R1" (your access/area repeater
call sign) and "R2" (a destination or gateway repeater
call sign). Each call sign can be programmed with up
to 8 characters.
up to 99 "UR" call signs in the call sign memory. Up to
500 repeater call signs can be stored in the repeater
list.
D
tal voice and low-speed data communications (includ-
ing GPS transmission).
q Push [DV DR] to select the DV mode.
w Push [MENU] one or more times to display the "M3"
screen (Menu 3).
the "D1" screen.
e Push [CS](F-1) to display the "CS" screen (Call
Sign).
r Push [Z](F-1) one or more times to display the
screen (
t
call sign memory.
y Push [EDT](F-3) to enter the call sign programming
mode.
u Rotate [MAIN DIAL] to select the first character to
input.
When inputting numbers, push the appropriate key-
pad key.
number.
i Push [Ω](F-2) to move the cursor backwards, or
push [≈](F-3) to move the cursor forwards.
o Repeat steps u and i to enter your own call sign.
radio type, area, etc.), go to step ! 0 , otherwise go to
step !2 .
!0 Push [≈](F-3) to move the cursor right side of "/".
!1 Repeat steps u and i to program the desired 4
character note.
!2 Push [MENU] to store the programmed call sign
and note.
!3 Push [MENU] again to return to the "CS" screen.
85
ush [MENU] once or twice to select
).
[CS]/[√] [EDT]
[MENU]
M3
CS C D
-
CS U
CQCQCQ
R
Ú
M
Y
MY
C L R
MY
Cursor
MY
[DV DR] [MAIN DIAL]
R > C S U R DSET
R
1
R
NOT USE
2
/ MY1
E D T N A M E
/ MY1
D E L S P C
Number input
[ ] [ ]
[DEL][SPC]
[MAIN DIAL]
/ MY1
D E L S P C
Input a space
Delete a character
Move cursor forwards
Move cursor backwards