Position Display (Gps Operation) - Icom IC-9100 Instruction Manual

9
GPS/GPS-A OPERATION
GPS operation (Continued)
D
q Hold down [CALL/GPS] for 1 second to display the
"GPS" screen.
w Push [POS](F-1) to display the position data. Then
push [F-2] one or more times to display your current
position, received position or GPS memory alarm
position information.
North or South as the top of the compass.
e Push [MENU] to return to the "GPS" screen.
Depending on the GPS signals, your posi-
tion/elevation may change even though you are sta-
tionary.
These sample indications assume that "Position For-
mat" is selected as "ddd°mm.mm," and "Units" is se-
lected as "feet/mile." (p. 132)
"TIME" data may not be displayed, depending on the
connected GPS receiver.
123
tude, direction*, elevation* and the
time*.
* These items do not appear when
sition" item option in the GPS Set
mode. (p. 132)
latitude, longitude, call sign, direc-
tion and distance from your posi-
tion.
nel's latitude, longitude, direction
and distance from your position,
if the GPS Alarm function is set to
the channel.
channels or a bank, "–" is displayed
instead of the position information.
[POS]
-
[MENU]
GPS
P O S G P M
-
Push
M Y P o s i t i o n
Ú
-
M
2 0 ˚ 3 5 . 0 0 ' N E L E :
1 3 4 ˚ 2 6 . 0 0 ' E 1 2 : 0 0 : 0 0
R X P o s i t i o n
Ú
R 3 5 ˚ 4 5 . 0 0 ' N J A 3 Y M K
1 3 5 ˚ 3 6 . 0 0 ' E D S T : 1 0 5 1 m l
G P M P o s i t i o n
Ú
G
3 5 ˚ 4 5 . 0 0 ' N
1 3 5 ˚ 3 6 . 0 0 ' E D S T : 1 0 5 1 m l
[F-2] [CALL/GPS]
M S G S E T
G L W R
Approximately 2 seconds
1 6 f t
Push
G L W R
Approximately 2 seconds
Push
G L
Approximately 2 seconds