Receiver Call Signs; Desired Call Record Display - Icom IC-9100 Instruction Manual

8
DV MODE OPERATION
When a call is received in the DV mode, the calling sta-
tion and repeater call signs being used can be stored
in the received call record. The stored call signs can
be displayed in the following manner.
Up to 20 calls can be stored.
D
q Push [DV DR] to select the DV mode.
w Push [MENU] one or more times to display the "M3"
screen (Menu 3).
the "D1" screen.
e Push [CD](F-2) to display the "CD" screen (Call Re-
cord).
r Rotate [MAIN DIAL] to select the desired record
channel (RX01 to RX20).
record channel.
t Push [Z](F-1) one or more times to display the call
record.
that made the call.
called, or "CQCQCQ."
ing station accessed, or the call sign
of the gateway repeater the calling
station used.
heard the call on.
After the MSG screen, the date and time infor-
mation are displayed. If the received date and
time are unknown, the elapsed time after the call
was received is displayed (e.g. "(–12:34)"). If the
power is turned OFF, then ON, or 48 hours have
passed, "– – – – /– – /– – – –:– –" is displayed.
y Push [Z](F-1) one or more times to return to the
"CD" screen.
95
[√] [CD]
[MENU]
M3
CS C D
CD JG3YMK
CQCQCQ
CD CALLER: JG3YMK
Ú
CALLED: CQCQCQ
CD RxRPT1:
- Ú
RxRPT2:
CD MSG: REPEATER IS JP3
Ú
YHH A
CD
Ú
[CLR]
[DV DR] [MAIN DIAL]
R > C S U R DSET
RX01
CLR COPY
/
COPY
COPY
2010/10/10 10:10