About The 5 Mhz Frequency Band Operation - Icom IC-9100 Instruction Manual

D
Operation on the 5 MHz band is allowed on 5 discrete
frequencies and must adhere to the following:
It's your responsibility to set all controls so that trans-
mission in this band meets the stringent conditions
under which amateur operations may use these fre-
quencies.
We recommend that you store these fre-
quencies, mode and filter settings into memory
channels for easy recall.
* The FCC specifies center frequencies on the
5 MHz band. However, the IC-9100 displays carrier
frequency. Therefore, tune the transceiver to
1.5 kHz below the specified FCC channel center
frequency.
(Effective Radiated Power)
BASIC OPERATION
5.33050 MHz
5.34650 MHz
5.36650 MHz
5.37150 MHz
5.40350 MHz
To assist you in operating the 5 MHz band within the
rules specified by the FCC, transmission is illegal on
any 5 MHz band frequency other than the five fre-
quencies shown in the table above.
3
5.33200 MHz
5.34800 MHz
5.36800 MHz
5.37300 MHz
5.40500 MHz
40
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21