Memory Keyer Send Menu - Icom IC-9100 Instruction Manual

4
RECEIVE AND TRANSMIT
Electronic keyer functions (Continued)
D
Pre-set characters can be sent using the Keyer Send
menu. Contents of the memory keyer are set in the
Edit menu.
q In the CW mode, push [MENU] to display the "M1"
screen (Menu 1).
w
ory Keyer).
e Push [SEND](F-2) to display the "SEND" screen
(Keyer Send).
r Push [TRANSMIT] to switch the transceiver to
transmit, or turn ON the Break-in function. (p. 79)
t Push one of the function keys, [M1](F-1) to
[M4](F-4), to send the memory keyer contents.
transmission.
contents are sent.
by 1 before sending the memory keyer contents to a
station a second time.
60 seconds (1 second steps) in the "Keyer Repeat Time"
item of the Keyer Set mode. (p. 54)
y
ory Keyer).
u Push [MENU] to return to the "M1" screen (Menu 1).
For your information
When an external keypad is connected to pin 3 and
pin 7 of the [MIC] connector, the contents of M1 to
M4 can be transmitted without selecting the keyer
send menu.
See page 167 for details.
51
-
SEND
M 1 M 2
CQ
SEND
M 1 M 2
UR
SEND
M 1 M 2
-
CFM
SEND
M 1 M 2
SEND QRZ?
M 1 M 2
CQ
SEND
[ M 1] M 2
" [ " and " ] " appear
001
M 3 M 4 – 1
TEST CQ TE 001
M 3 M 4 – 1
Counter
5NN001 BK 001
M 3 M 4 – 1
Count up trigger icon
TU 001
M 3 M 4 – 1
001
M 3 M 4 – 1
TEST CQ TE 001
M 3 M 4 – 1