Latitude Data Programming; Longitude Data Programming; Time Data Programming; Memory Bank Setting - Icom IC-9100 Instruction Manual

u When "LAT" is selected, rotate [MAIN DIAL] to
enter the desired latitude data.
Ω ≈](F-3) to select the digit.
i Push [Y](F-1) or [Z](F-2) to save the pro-
grammed latitude data, and select other item.
o When "LON" is selected, rotate [MAIN DIAL] to
enter the desired longitude data.
Ω ≈](F-3) to select the digit.
!0 Push [Y](F-1) or [Z](F-2) to save the pro-
grammed longitude data, and select other
items.
!1 When "TIME" is selected, rotate [MAIN DIAL] to
enter the desired time data.
Ω ≈] to move the cursor forward and back-
ward.
!2 Push [Y](F-1) or [Z](F-2) to save the pro-
grammed time data, and select other item.
!3 When "BANK" is selected, rotate [MAIN DIAL] to
select the desired bank letter.
!4 Push [EDT](F-4) to enter the bank name pro-
gramming mode.
!5 Repeat steps w through r of 'Name programming'
on the previous page to program a bank name of
up to 9 characters.
!6 Push [MENU] to save the programmed bank
name, and return to the "ADD" screen.
y After programming, hold down [WR](F-5) for 1 sec-
ond to write the data into the GPS memory, and
return to the "GPM" screen (GPS Memory).
u Push [MENU] two times to return to the "GPS"
screen.
GPS/GPS-A OPERATION
Blinks
ADD
L A T : 0 º 0 0 . 0 0 ' N
Ù Ú
Select the item Select the digit
(This illustration is based on entering a latitude.)
Blinks
ADD T I M E : − − : − − : − −
Ù Ú
Select the item Select the digit
Bank A is selected.
ADD B A N K : A
Ù Ú
Blinks
ADD B A N K : A
a b c
Move cursor forward
Move cursor backward
Select the character type
9
North latitude
is selected.
W R
Write into the
GPS memory
W R
Write into the
GPS memory
E D T W R
Push
D E L S P C
Input a space
Delete a character
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
128