Table of Contents
Advertisement
Appendix B
This appendix describes error messages that might be encountered during the RAS96's
power-on self-test (POST).
Appendix C
This appendix describes codes generated by the BIOS during POST.
Appendix D
This appendix lists memory SIMMs that are known to work with the RAS96.
Appendix E
This appendix provides Regulatory Agency information pertaining to this E1device.
Technical Specifications
• Intel 430FX Triton chipset
• Supports 100 MHz, 133 MHz, 166 MHz, and 200 MHz Intel
• PCI/ISA bus architecture for full PCI bus support.
• On-board PCI-bus SVGA video controller with 1 MB of video DRAM supports resolutions to
1024 by 768 pixels by 256 colors.
• Supports 72-pin SIMMs of 4 MB, 8 MB, 16 MB, or 32 MB to form a memory size between 8 MB
and 128 MB. Memory type can be fast page or EDO, 60 ns or 70 ns, parity or non-parity.
• 512K of L2 cache memory.
• One parallel port and two RS-232C serial ports with 16550 UARTs (DB-9P connector for
COM1; COM2 is for E1 cards).
• 1.44 MB floppy disk controller.
• IDE hard disk interface.
• 2.5-inch on-board hard disk. Available disk sizes include 800 MB, 1.2 GB, 1.6 GB, and 2.1 GB.
• Keyboard and speaker interfaces.
• Real-time clock with battery backup.
• Award BIOS with custom features.
• Watchdog timer.
• E1 frame format: CRC4, FAS, and ITU Q.400-Q.490
• E1 line coding: AMI, HDB3
• E1 signal start method: R2DIGITAL
• Switches: Power switch and reset switch on front panel.
• Indicators: Front panel LEDs for monitoring network and E1 operations.
• Dimensions: 23.4 × 4.32 × 29.2 cm (9.22 × 1.70 × 11.5 in.) H × W × D.
• Weight: 1.0 kg (2.2 lb).
• Operating temperature: 0° to 40° C (32° to 104° F).
CommPlete Communications Server
POST Messages
POST Codes
Approved Memory
Regulatory Agency Information
1 Introduction
Pentium
processors.
®
®
3
Advertisement
Table of Contents
