Ip500 Trunk Cards - Avaya IP Office 8.1 Product Description

IP500 Legacy Card Carrier
This card allows a variety of IP400 trunk or VCM cards to be used with the IP500 control unit. The front of the
card includes a number of panels that can be snapped off to match the ports available when an IP400 trunk
card is fitted.
This card does not accept any IP500 trunk cards.
·
The IP500 control unit can accept up to 2 IP400 trunk or VCM cards by mounting each card on an
·
IP500 Legacy Card Carrier
This card supports the following IP400 cards:
·
PRI T1
·
Dual PRI T1
·
PRI 30 E1 (1.4)
·
Dual PRI E1
·
PRI 30 E1R2 RJ45
·

IP500 Trunk Cards

IP500 trunk cards can be fitted to existing IP500 base cards to provide support for trunk ports. The trunk card
uses the ports provided on the base card for cable connection. The addition of an IP500 trunk card is supported
on IP500 Digital Station, IP500 Analog Phone and IP500 VCM base cards. They are not supported on the IP500
Legacy Card Carrier base card.
In systems with both Analog Phone 8 base cards and analog trunk cards, combining the two types are
recommended as it then provides analog power failure support for one trunk/extension (not applicable to the
Analog Phone 2 base card).
Product Description
IP Office 8.1
Dual PRI E1R2 RJ45
·
ANLG 4 UNI
·
BRI-8 (UNI)
·
VCM 4
·
© 2012 AVAYA All rights reserved.
VCM 8
·
VCM 16
·
VCM 24
·
VCM 30
·
Issue 26.k.- (16 August 2012)
Page 98