3.10 ERASE LAMP REPLACEMENT
A219R557.wmf
1. Open the front cover.
2. Remove the imaging unit. (See Imaging Unit Removal.)
3. Open the rear cover. (See Rear Cover Removal.)
4. Remove the high voltage supply board (4 screws and 6 connectors).
5. Remove the optics cooling fan motor [A] (2 screws and 1 connector).
6. Remove the erase lamp [B] (1 screw and 1 connector) from the front of
the copier as shown.
SM
CÓPIA NÃO CONTROLADA
[A]
[B]
6-27
CÓPIA NÃO CONTROLADA
AROUND THE DRUM
A219R541.wmf
A219