Scanner Belt Removal - Ricoh A219 Service Manual

Table of Contents

Advertisement

OPTICS

2.3 SCANNER BELT REMOVAL

1. Turn off the main switch and unplug the power supply cord.
2. Remove the platen cover or DF.
3. Remove the exposure glass. (See Exposure Glass Removal.)
4. Remove the upper cover. (See Upper Cover Removal.)
5. Remove the rear cover. (See Rear Cover Removal.)
6. Loosen the two screws [A] securing the wire tension brackets, as shown.
7. Remove the two springs [B].
8. Remove the 1st scanner and the 2nd scanner.
9. Replace the scanner belts.
10. Reassemble.
11. Adjust the position of the 1st scanner and the 2nd scanner. (See 1st And
2nd Scanner Adjustment.)
A219
CÓPIA NÃO CONTROLADA
[B]
[A]
6-8
CÓPIA NÃO CONTROLADA
[A]
A219R510.wmf
SM

Advertisement

Table of Contents
loading

This manual is also suitable for:

B019A245

Table of Contents