QUENCHING
7.2
QUENCHING LAMP REPLACEMENT
[A]
[B]
[D]
1. Remove the middle left and middle right covers.
2. Remove the left and right horizontal covers. (See Left and Right
Horizontal Cover Removal.)
3. Remove the cooling fan motor [A] (2 screws and 1 connector).
4. Remove the press roller plate [B] (4 screws).
5. Remove the 4th press rollers [C] (7 sets ....... 2 screws each).
6. Remove the quenching lamp unit [D] (4 screws).
7. Remove both quenching lamps from the quenching lamp bracket (4
screws each).
[C]
5-44
31 December 1992