Copy Quality Adjustment - Ricoh A219 Service Manual

8. COPY QUALITY ADJUSTMENT

- General Information -
Image density is affected by the following factors:
(1) Light Intensity
(2) Development Bias Voltage
(3) Toner Density
(4) Grid Voltage/Drum Current
The items listed above must be kept in balance to maintain correct image
density.
In the field, image density should be adjusted first by changing the
exposure lamp voltage. If results are unsatisfactory, the bias voltage
can be changed (SP33/34). Also, if requested by the customer, the
overall image density can be changed by changing the toner density
(SP38/UP6). Normally, this should be kept at the normal position
(factory setting).
The grid voltage and charge corona current are carefully adjusted at the
factory. Any adjustment out of the adjustment standard will result in
overtoning, toner scattering, dirty background, or light image density
problems. The grid voltage and charge corona current adjustment
should be done only when replacing the power pack or to correct
certain problems with image density after checking all other possible
causes.
SM
CÓPIA NÃO CONTROLADA
6-49
CÓPIA NÃO CONTROLADA
COPY QUALITY ADJUSTMENT
A219