By-Pass Paper End Sensor And Registration Sensor Replacement - Ricoh A219 Service Manual

PAPER FEED
4.9 BY-PASS PAPER END SENSOR AND REGISTRATION
SENSOR REPLACEMENT
[F]
[D]
1. Turn off the main switch and unplug the power supply cord.
2. Remove the by-pass feed table. (See step 2 of By-pass Feed Roller and
Friction Pad Replacement.)
3. Remove the screw [A].
4. Slide the feed roller shaft cover [B] to the right, and remove it (1 screw).
5. Remove the paper end sensor cover [C] (1 tab).
6. Remove the sensor ass'y [D] (1 screw and 2 connectors).
7. Replace the by-pass paper end sensor [E] and the registration sensor [F].
NOTE: 1) Take care not to damage the feeler when removing the sensor
ass'y.
2) When reinstalling the ass'y, be careful not to get the harness
caught on the upper guide.
A219
CÓPIA NÃO CONTROLADA
[C]
6-38
CÓPIA NÃO CONTROLADA
[B]
[A]
[E]
A219R515-2.wmf
SM