1St And 2Nd Scanner Position Adjustment - Ricoh A219 Service Manual

2.4 1ST AND 2ND SCANNER POSITION ADJUSTMENT

NOTE: Adjust when replacing the scanner belt or the 2nd scanner.
1. Turn off the main switch and unplug the power supply cord.
2. Remove the upper cover. (See Upper Cover Removal.)
3. From the 1st Scanner Reinstallation procedure,
loosen the two screws in step 1, then do steps 2-5.
4. Attach the short belt to the clamp [A] to connect the two scanners.
5. Move the lens to the rightmost position.
6. Insert two positioning pins [B] in the holes to secure the 1st and 2nd
scanners.
NOTE: To move the scanners, pull the scanner belt. Do not apply force
to the scanners directly.
7. Attach the long belt to the the clamp [C] to connect the two scanners.
8. Check the image quality. Perform the Focus Adjustment (see Focus
Adjustment., and the Horizontal Magnification Adjustment (see Horizontal
Magnification Adjustment) if necessary.
SM
CÓPIA NÃO CONTROLADA
[B]
[C]
6-9
CÓPIA NÃO CONTROLADA
OPTICS
[A]
A219R511.wmf
A219