Table of Contents
Advertisement
1. INSTALLATION REQUIREMENTS
1.1 ENVIRONMENT
1. Temperature Range:
2. Humidity Range:
3. Ambient Illumination:
4. Ventilation:
5. Ambient Dust:
6. If the place of installation is air-conditioned or heated, do not place the
machine:
1) Where it will not be subjected to sudden temperature changes.
2) Where it will not be directly exposed to cool air from an air-conditioner.
3) Where it will not be directly exposed to heat from a heater.
7. Do not place the machine where it will be exposed to corrosive gasses.
8. Do not install the machine at any location over 2,000 m (6,500 feet)
above sea level.
9. Place the copier on a strong and level base.
10. Do not place the machine where it may be subjected to strong vibrations.
1.2 MACHINE LEVEL
1. Front to back:
2. Right to left:
SM
CÓPIA NÃO CONTROLADA
10°C to 30°C (50°F to 87°F)
15% to 90% RH
Less than 1,500 lux (Do not exposure to direct
sunlight.)
Room air should turn over at least 3 times per
hour
Less than 0.15 mg/m
Within 5 mm (0.2") of level
Within 5 mm (0.2") of level
3-1
CÓPIA NÃO CONTROLADA
INSTALLATION REQUIREMENTS
3
-3
3
(4 x 10
oz/yd
)
A219
Advertisement
Table of Contents
