Table of Contents
Advertisement
INSTALLATION
8.2 COPIER INSTALLATION PROCEDURE
[C]
[E]
CAUTION
Do not plug in the power cord before starting the following procedure.
1. Remove all strips of tape shown above.
2. Pull out the paper trays [A], and remove the cardboards [B].
3. Open the platen cover and remove the lock pin [C].
NOTE: Save the lock pin for future shipping.
4. Remove the left side scale [D] (2 screws) and remove the lock pins [E].
NOTE: Save the lock pins for future shipping.
5. Open the front cover and raise the toner bottle holder lever [F].
Then pull down the securing lever [G], and remove the toner bottle holder
[H].
A245
CÓPIA NÃO CONTROLADA
[A]
[D]
A245I506.wmf
11-16
CÓPIA NÃO CONTROLADA
[B]
A245I500.wmf
[F]
[H]
[G]
A245I501.wmf
SM
Advertisement
Table of Contents
