12. REPLACEMENT AND ADJUSTMENT
12.1 PAPER FEED ROLLER REPLACEMENT
[D]
[C]
Paper Feed Rollers
1. Remove both paper trays.
2. Remove the front door and the inner cover only when replacing the 1st
paper feed roller.
3. Remove the paper feed bushing [A] (1 screw).
4. Pull the paper feed roller shaft [B] out.
5. Replace the paper feed roller [C].
NOTE: When reinstalling the feed roller assembly, make sure of the
following:
1) Do not touch the feed rollers with bare hands.
2) Reinstall the feed rollers face up as shown.
3) Ensure that the pin [D] on the end of the feed roller shaft fits into
the slot [E] on the end of the drive shaft.
SM
CÓPIA NÃO CONTROLADA
[E]
[B]
11-45
CÓPIA NÃO CONTROLADA
REPLACEMENT AND ADJUSTMENT
A245R500.wmf
[A]
A245