Multifunction Display (Mfd) - Skoda 2014 Yeti Owner's Manual

Hide thumbs Also See for 2014 Yeti:
Table of Contents

Advertisement

Gear recommendation - segment display
The recommended
gear and the arrow icon is displayed.
1)
 Recommends that you shift to a higher gear.
 Recommends that you shift to a lower gear.
If for example   is shown in the display with vehicles that have manual gear-
boxes this indicates that it is better to shift from a lower gear to the 4th gear.
If for example   is shown in the display with vehicles that have an automatic
gearbox and are in the manual switching mode (Tiptronic), this indicates that it
is better to shift from the 4th gear to a higher gear.
WARNING
The driver is always responsible for selecting the correct gear in different
driving situations, such as overtaking.
For the sake of the environment
A suitably selected gear has the following advantages.
It helps to reduce fuel consumption.
It reduces the operating noise.
It protects the environment.
It benefits the durability and reliability of the engine.
Door, boot or engine compartment warning
Read and observe
on page 40 first.
Vehicles with a MAXI DOT display
If at least one door, the boot or bonnet is open, the display indicates the rele-
vant open door, boot or bonnet vehicle icon.
Vehicles with a segment display
If at least one door or the tailgate is open, the
ment cluster lights up
» page
34.
If at least one door or the tailgate is open, the
ment cluster lights up
» page
34.
An acoustic signal will also sound if you drive the vehicle above 6 km/h when a
door is open.
1)
With vehicles that have an automatic gearbox and in the manual switching mode (Tiptronic) the current-
ly engaged gear is shown.
42
Using the system
warning light in the instru-
warning light in the instru-

Multifunction display (MFD)

Introduction
This chapter contains information on the following subjects:
Memory
Information overview
Warning at excessive speeds
The driving data is displayed on the multifunction display.
The multifunction display only operates if the ignition is switched on. After the
ignition is switched on, the function that was last selected before switching
off the ignition is displayed.
For vehicles with a MAXI DOT display, the menu item MFD must be selected
and confirmed in the main menu
On vehicles with a MAXI DOT display, there is an option to fade out some of
the information
» page
45, Settings.
WARNING
Concentrate fully at all times on your driving! As the driver, you are fully
responsible for the operation of your vehicle.
Even at temperatures around +4 °C, black ice may still be on the road sur-
face! Do not only rely upon the information given on the outside tempera-
ture display that there is no ice on the road.
CAUTION
Pull out the ignition key if coming in contact with the display (e.g. when clean-
ing) to prevent any possible damage. On vehicles with the KESSY system,
switch off the ignition and open the driver's door.
Note
In certain national versions the displays appear in the Imperial system of
measures.
If the display of the second speed is activated in mph, the current speed is
not indicated in km/h on the display.
The amount of fuel consumed will not be indicated.
» page
45, MAXI DOT display.
43
43
44

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents