Skoda 2014 Yeti Owner's Manual page 145

The system uses ultrasound waves to calculate the distance between the
bumper and an obstacle. The ultrasonic sensors are, depending on vehicle
equipment,, located in the back or in the front bumper.
WARNING
The system only serves to support and does not relieve the driver of the
■
responsibility for the vehicle operation.
Moving persons or objects may not be recognized by the system sensors.
■
Under certain circumstances, surfaces of certain objects and types of
■
clothing cannot reflect the system signals. For this reason, such people or
objects may not be recognised by the system sensors.
External noise sources may affect the signals of the system sensors. Un-
■
der adverse conditions, this may cause objects or people not to be recog-
nised by the system.
Before reversing, you should make sure that there are no small obstacles,
■
such as rocks, thin posts, trailer drawbars etc. in front or behind your vehi-
cle. Such obstacles may not be recognised by the system sensors.
CAUTION
Keep the system sensors in the bumpers clean, snow-and ice-free and do not
■
cover with any objects, otherwise the system functioning may be impaired.
The system function may be limited under adverse weather conditions
■
(heavy rain, water vapour, very low or high temperatures etc.).
Additionally installed modules such as bicycle carriers can impair the function
■
of the parking aid.
Function
Fig. 130 Sampled areas and range of the sensors / system button (Ver-
sion 2, 3)

Read and observe and
Depending on the equipment, the following system versions can ex-
ist » Fig. 130.
›
Version 1: warns of obstacles in the areas
›
Version 2: warns of obstacles in the regions
›
Version 3: warns of obstacles in the regions
Approximate range of sensors (in cm)
Area » Fig. 130 Version 1
(4 sensors)
-
A
-
B
160
C
60
D
-
E
Acoustic signals and display
The interval between the acoustic signals becomes shorter as the clearance is
reduced. A continuous tone sounds from a distance of approx. 30 cm - danger
area. From this moment on do not continue driving!
Description of the indication in the display of the radio or navigation sys-
tem, » Radio instruction manual, navigation system user guide.
Towing a trailer
On vehicles equipped with a factory-fitted towing device, only system areas
and » Fig. 130 are active when towing a trailer.
B
Note
If with Version 3 vehicles not all fields around the vehicle are active after ac-
■
tivation the vehicle should be moved forwards or backwards.
The signal tones for front obstacle recognition are factory-set to be higher
■
than for rear obstacle recognition.
The sound of the park-assist can be adjusted via the MAXI DOT display in the
■
Assistants menu option » page 45.
on page 143 first.
, .
C D
, , , .
A B C D
, , , , .
A B C D E
Version 2 Version 3
(8 sensors) (12 sensors)
120
60
160
60
-
Assist systems
120
60
160
60
60
A
143