Skoda 2014 Yeti Owner's Manual page 117

If there is no free space available to create a new user profile, delete an exist-
ing user profile.
During the connecting procedure, no other mobile phone may be connected
with the hands-free system.
Up to four mobile phones can be paired with the hands-free system, whereby
only one mobile phone can communicate with the hands-free system.
The visibility of the hands-free system is automatically switched off 3 minutes
after the ignition is switched on and is also deactivated when the mobile
phone has connected to the hands-free system.
Restoring the visibility of the hands-free system
If you have not managed to connect your mobile phone with the hands-free
system within 3 minutes of switching on the ignition, the visibility of the
hands-free system can be reestablished for 3 minutes in the following ways.
›
By turning the ignition off and on.
›
By turning voice control off and on.
›
In the MAXI DOT display under menu item Bluetooth - Visibility.
Creating a connection with an already paired mobile phone
After switching on the ignition, the connection is automatically established for
the already paired mobile phone
1)
connection has been established.
Disconnecting the connection
›
By withdrawing the ignition key.
›
By disconnecting the hands-free system in the mobile phone.
›
By disconnecting from the user in the MAXI DOT display under the menu item
Bluetooth - User.
Solving connection problems
If the hands-free system reports No paired phone found, check the operating
status of the mobile phone.
›
Is the mobile phone switched on?
›
Is the PIN code entered?
›
®
Is Bluetooth active?
1)
Some mobile phones have a menu, in which the authorisation for establishing a Bluetooth
is completed by inputting a code. If the authorisation input is required, it must always be performed
when re-establishing the Bluetooth connection.
2)
On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the naviga-
tion system menu; refer to the » operating instructions for the Amundsen+ navigation system.
3)
This function is not available in vehicles fitted with the Amundsen+ navigation system.
. Check on your mobile phone if the automatic
›
Is the visibility of the mobile phone active?
›
Has the mobile phone already been paired with the hands-free system?
Telephone operation in the MAXI DOT display
The following menu items can be selected from the Phone menu.
Phone book
■
Dial number
■ 2)
■ Call register
Voice mailbox
■
Bluetooth
■ 2)
■ Settings
3)
Back
■
Phone book
The Phone book menu item lists the contacts downloaded from the telephone
memory and the mobile phone SIM card.
Dial number
Any telephone number can be entered in the Dial number menu item. The re-
quired digits must be selected one after the other using the adjustment wheel,
and then confirmed by pressing the adjustment wheel. You can select digits
0-9, symbols, , # and the Cancel, Call and Delete functions.
Call register
The following menu items can be selected in the Call register menu item.
Missed calls - List of missed calls
■
■ Dialled numbers - List of dialled numbers
Received calls - list of received calls
■
Voice mailbox
In the Voice mailbox menu item, you can set the number of the voice mailbox
and then dial the number.
®
connection
Communication and multimedia
2)

115