Replacing front windscreen wipers
Fig. 182 Windscreen wiper blade
Read and observe
on page 205 first.
When in the rest position, the wiper arms cannot be fold down from the wind-
screen. Before replacing the windscreen wiper blade, put the windscreen wip-
er arms into the service position.
Service position for changing wiper blades
›
Closing the bonnet.
›
Switch the ignition off and on again.
›
Press the control lever in position
The windscreen wiper arms move into the service position.
Removing the wiper blade
›
Lift the wiper arm from the windscreen in the direction of
›
Press the securing clip
in the direction of arrow
A
blade.
›
Remove the wiper blade in the direction of the arrow
Attaching the windscreen wiper blade
›
Push the windscreen wiper blade to the stop until it locks into place.
›
Check that the windscreen wiper blade is correctly attached.
›
Fold the wiper arms back to the windscreen.
The windscreen wiper arms move back into the rest position - after switching
on the ignition and changing the position of the window wiper lever or when
driving at a speed of more than 6°km/h.
206
Do-it-yourself
within 10 seconds
» page
72.
4
» Fig.
182.
1
to unlock the wiper
2
.
3
CAUTION
If the windscreen wipers are handled carelessly, there is a risk of damage to
the windscreen.
Replacing the rear window wiper blade
Fig. 183 Rear window wiper blade
Read and observe
on page 205 first.
Removing the wiper blade
›
Lift the wiper arm from the windscreen in the direction of
›
Tilt the wiper blade to the stop in the same direction.
›
Hold the upper part of the wiper arm and press the securing mechanism
in the direction of arrow
.
2
›
Remove the wiper blade in the direction of the arrow
Attaching the windscreen wiper blade
›
Push the windscreen wiper blade to the stop until it locks into place.
›
Check that the windscreen wiper blade is correctly attached.
›
Fold the wiper arm back to the windscreen.
» Fig.
183.
1
A
.
3