Skoda 2014 Yeti Owner's Manual page 119

›
Select the phone you wish to connect from the list of units found.
›
Confirm the PIN .
1)
›
If your SIM card is blocked by a PIN code, enter the PIN code for the SIM card
in your phone. The telephone connects to the hands-free system (during the
first connection you can only enter the PIN code in the MAXI DOT display
when the vehicle is stationary, as this is the only situation when you can
choose whether the PIN code should be stored).
›
To save a new user, follow the instructions in the Maxi DOT display.
›
Reconfirm the rSAP command on your mobile phone to download the tele-
phone book and the identification data from the SIM card into the hands-free
system.
Connecting the telephone with the hands-free system via the HPP profile
›
®
Activate Bluetooth and the visibility of your mobile phone on your tele-
phone.
›
Switch on the ignition.
›
Select the Phone - New user menu in the MAXI DOT display and wait until
the hands-free system has completed the search.
›
Select the phone you wish to connect from the list of units found.
›
Confirm the PIN .
1)
›
Follow the instructions on the MAXI DOT display and the mobile phone to
store a new user or to download the telephone book and identification data
from the SIM card into the hands-free system.
The telephone primarily connects via the rSAP profile.
If the PIN code was stored, the telephone is automatically detected and con-
nected with the hands-free system the next time the ignition is switched on.
Check your mobile phone to see whether this automatic connection has been
established.
Disconnecting the connection
›
By removing the key from the ignition lock (the connection is disconnected
during a telephone call).
›
By disconnecting the hands-free system in the mobile phone.
›
Select the user by disconnecting the user in the Maxi DOT display in the
Bluetooth - User menu option - Disconnect.
®
1) Depending on the Bluetooth version on the mobile phone, an automatically generated 6-digit PIN (SSP)
will either be displayed, or a 16-digit code displayed in the MAXI DOTdisplay will need to be entered into
your mobile phone and confirmed within 30 seconds by following the instructions on your mobile phone
display.
2)
Does not apply for Radio Swing.
On vehicles which are fitted with a radio or navigation system at the factory, it
is possible to terminate the telephone call after removing the key from the ig-
nition lock by pressing the button on the touchscreen of the radio
tion system; refer to the » Operating instructions for the radio or navigation
system.
Note
In the memory of the hands-free system, up to three users can be stored,
■
whereby the hands-free system can only communicate actively with one user.
If a connection is established with a fourth mobile phone, one of the users
must be deleted.
When connecting to the hands-free system, follow the instructions on your
■
mobile phone.
Telephone operation in the MAXI DOT display
If no phone is connected to the hands-free system, the message No paired
phone found appears along with the following menu items when the Phone
menu is selected.
■ Help - This menu item appears when no paired phone is stored in the memo-
ry of the hands-free system.
Connect - This menu item appears when one or more paired phones are stor-
■
ed in the memory of the hands-free system.
New user - New phone
■
Media player - Media player
■
■ Active device - Connected device
Paired devices - List of paired devices
■
Search - Device search
■
■ Visibility - Visibility on/off
SOS - Emergency call
■
If a telephone is paired with the hands-free system, the following menu items
can be selected in the Phone menu.
Phone book
The Phone book menu item lists the contacts downloaded from the telephone
memory and the mobile phone SIM card.
or naviga-
2)
Communication and multimedia

117