Multifunction Display (Mfd) - Skoda 2014 Rapid Owner's Manual

Hide thumbs Also See for 2014 Rapid:
Table of Contents

Advertisement

WARNING
The driver is always responsible for selecting the correct gear in different
driving situations, such as overtaking.
For the sake of the environment
A suitably selected gear has the following advantages.
It helps to reduce fuel consumption.
It reduces the operating noise.
It protects the environment.
It benefits the durability and reliability of the engine.
Door, boot or engine compartment warning
Read and observe
on page 37 first.
Vehicles with a MAXI DOT display
If at least one door, the boot or bonnet is open, the display indicates the rele-
vant open door, boot or bonnet vehicle icon.
Vehicles with a segment display
If at least one door or the tailgate is open, the
ment cluster lights up
» page
31.
An acoustic signal will also sound if you drive the vehicle above 6 km/h when a
door is open.

Multifunction display (MFD)

Introduction
This chapter contains information on the following subjects:
Memory
Information overview
Warning at excessive speeds
The driving data is displayed on the multifunction display.
The multifunction display only operates when the ignition is switched on. After
the ignition is switched on, the function that was last selected before switch-
ing off the ignition is displayed.
For vehicles with a MAXI DOT display, the menu item MFD must be selected
and confirmed in the main menu
warning light in the instru-
» page
42, MAXI DOT display.
On vehicles with a MAXI DOT display, there is an option to fade out some of
the information
» page
42, Settings.
WARNING
Concentrate fully on your driving at all times! As the driver, you are fully
responsible for the operation of your vehicle.
Even at outside temperatures of around +4 °C, black ice may still be
present on the road surface! You should therefore not rely solely on the
outside temperature display for an indication of whether there is black ice
on the road.
CAUTION
Pull out the ignition key if coming in contact with the display (e.g. when clean-
ing) to prevent any possible damage.
Note
In certain national versions the displays appear in the Imperial system of
measures.
If the display of the second speed is activated in mph, the current speed is
not indicated in km/h on the display.
The amount of fuel consumed will not be indicated.
Memory
Fig. 26
Multi-function display - memory display
39
40
41
Read and observe
In memory the values of elements of the multifunction display(e.g. average
fuel consumption) are recorded.
The multifunction display is equipped with two memories, 1 and 2.
and
on page 39 first.
Information system
39

Advertisement

Table of Contents
loading

Table of Contents