Skoda 2014 Yeti Owner's Manual page 197

›
Stow the tool kit in the space provided and secure using the band.
›
Check the tyre pressure on the installed spare wheel as soon as possible.
›
Have the tightening torque of the wheel bolts checked with a torque
wrench as soon as possible.
Replace the damaged wheel or consult a specialist garage about repair op-
tions.
WARNING
If it is established when changing a wheel that the wheel bolts are corro-
■
ded and difficult to move, then these must be replaced.
Drive cautiously and only at a moderate speed until the tightening torque
■
has been checked.
Loosening/tightening wheel bolts

Read and observe on page 193 first.
Release
›
Push the wheel wrench onto the wheel bolt to the stop
›
Grasp the end of the wrench and turn the bolt about one turn in the direction
of the arrow » Fig. 166.
Tightening
›
Push the wheel wrench onto the wheel bolt to the stop
›
Grasp the end of the wrench and turn the bolt against the direction of the
arrow » Fig. 166, until it is tight.
1)
Use the appropriate adapter for undoing and tightening the anti-theft wheel bolts
Fig. 166
Changing a wheel: Loosening the
wheel bolts
.
1)
.
1)
» page 196.
WARNING
Undo the wheel bolts only a little (about one turn) as long as the vehicle
■
has not yet been jacked up. Otherwise the wheel could become loose and
fall off.
If it proves difficult to undo the bolts, carefully apply pressure to the end
■
of the wrench with your foodt. Keep hold of the vehicle when doing so, and
make sure you keep your footing.
Lift vehicle
Fig. 168 Attach lifting jack

Read and observe on page 193 first.
Position the lifting jack below the jacking point closest to the faulty
wheel » Fig. 167.
Fig. 167
Jacking points for positioning
lifting jack
Emergency equipment and self-help

195