Skoda 2014 Yeti Owner's Manual page 111

Hide thumbs Also See for 2014 Yeti:
Table of Contents

Advertisement

WARNING
The auxiliary heating must never be operated in closed rooms (e.g. garag-
es) – risk of poisoning!
The auxiliary heating must not be allowed to run during refuelling – risk
of fire.
The exhaust pipe of the auxiliary heating is located on the underside of
the vehicle. Therefore, if you wish to operate the auxiliary heating, do not
park the vehicle in such a way that the exhaust gases can come into con-
tact with highly flammable materials (e.g. dry grass) or easily inflammable
substances (e.g. spilt fuel) – risk of fire.
CAUTION
The running auxiliary heater consumes fuel from the vehicle tank and auto-
matically controls the filling level. If only a low quantity of fuel is present in the
fuel tank, the auxiliary heating switches off.
The exhaust pipe of the auxiliary heating, which is located on the underside
of the vehicle, must not be clogged and the exhaust flow must not be blocked.
If the auxiliary heating is running, the vehicle battery discharges. If the auxili-
ary heating and ventilation has been operated several times over a longer peri-
od, the vehicle must be driven a few kilometres in order to recharge the vehi-
cle battery.
Note
The auxiliary heating only switches the blower on, if it has achieved a coolant
temperature of approx. 50 °C.
At low outside temperatures, this can result in a formation of water vapour in
the area of the engine compartment. This is quite normal and is not an operat-
ing problem.
The air inlet in front of the windscreen must be free (e.g. of ice, snow or
leaves) to ensure that the auxiliary heating operates properly.
So that warm air can flow into the vehicle interior after switching on the aux-
iliary heating, you must maintain the comfort temperature normally selected
by you, leave the fan switched on and leave the air outlet vents in an open po-
sition. It is recommended to put the air flow in the position  or .
Switching on and off directly
Fig. 112 Button for switching on/off the system directly on the operating
part of the air conditioning/Climatronic
Read and observe
and
The auxiliary heating can be directly switched on or off at any time using the
button 
» Fig. 112
on the operating part of the air-conditioning system , on the
operating part of the Climatronic system or via the radio remote con-
trol
» page
110.
If the auxiliary heating has not already been switched off, it switches off auto-
matically after the running time set in the Running time menu.
After switching off the auxiliary heating, the coolant pump still runs for a short
period.
System settings
Read and observe
and
The following menu items can be selected from the Aux. heating menu item in
the MAXI DOT display (depending on the vehicle equipment).
Day of the wk. - set the current day of the week
Running time - Set the required running time in 5 minute increments. The
running time can be 10 to 60 minutes.
Mode - Set the desired heating/ventilation mode
Starting time 1, Starting time 2, Starting time 3 - for each pre-set time, the
day and the time (hour and minute) can be set for switching on the auxiliary
heating. An empty position can be found between Sunday and Monday when
selecting the day. If this empty position is selected, the activation is per-
formed without taking into account the day.
on page 109 first.
on page 109 first.
Heating and air conditioning
109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents