Description; Adjusting The Ready Position - Skoda 2014 Yeti Owner's Manual

Description

Fig. 139 Carrier for the towing device/tow bar

Read and observe and
The ball rod can be removed and can be found in the spare wheel well or in a
compartment for the spare wheel in the boot
Support for the towing device/tow bar
13-pin power socket
1
Mounting recess
2
Safety eyelet
3
Cover for the mounting recess
4
Dust cap
5
Locking ball
6
Green marking on the handwheel
7
Handwheel
8
Key
9
Lock cap
10
Red marking on the handwheel
11
Green box on the tow bar
12
Tow ball
13
Note
On the bottom of the key is a code number. If you lose a key, please contact a
specialist garage, who will be able to use this code number to provide you with
a new one.
154
Driving
on page 153 first.
» page 192.
» Fig. 139

Adjusting the ready position

Fig. 140 Setting the ready position
Fig. 141 Ready position

Read and observe and
Always set the ready position before fitting the tow bar.
›
Turn the key in direction of the arrow
A
›
Pull the handwheel in the direction of the arrow
B
tion of the arrow to the stop.
3
The handwheel remains locked in this position.
Correctly adjusted standby position
The key is in the unlocked position and cannot be removed.
C

The locking balls can be pushed fully into the tow bar.
 D
on page 153 first.
to the stop » Fig. 140.
1
and drag in the direc-
2
» Fig. 141
