Skoda 2014 Yeti Owner's Manual page 213

›
Disconnect the relevant connector with the light bulb in the direction of ar-
row » Fig. 187.
1
›
Remove the connector to the bulb in the direction of arrow
›
Remove the connector.
›
Insert the connector with the new bulb so that the fixing lug
bulb into the recess on the reflector.
›
Insert the respective protective cap
clockwise until it stops.
Note
We recommend you have the bulb replacement performed by a specialist ga-
rage.
Remove the protective grille for fog lights
Fig. 188 Guard: Version 1/version 2

Read and observe and
›
Undo the protective grille in the direction of the arrow
clamp for removing the wheel trims
›
Remove the protective grille.
.
2
A
» Fig. 186 on page 210 and rotate it
on page 210 first.
» Fig. 188
» page 192, Vehicle tool kit.
Remove the protective grille for fog lights - sensor plug for
parking assistance
adjusts the
Fig. 189 Guard: Version 1/version 2
Fig. 190 Remove the plug

Read and observe
using the
›
Remove the plastic cover for the guard in the arrow direction
the bow to pull the full wheel covers
›
Remove the remaining part of the grille.
›
Pull the latch out of the connector in the direction of arrow
›
Undo the latch on the connector in the direction of arrow
›
Remove the key in the direction of the arrow
The connector is installed in reverse order.
and on page 210 first.
» page 192, Vehicle tool kit.
.
3
Fuses and light bulbs
» Fig. 189 using
» Fig. 190.
1
.
2
211