Inertia Reels And Belt Tensioners - Skoda 2014 Yeti Owner's Manual

Hide thumbs Also See for 2014 Yeti:
Table of Contents

Advertisement

Belt height adjustment on the front seats
Read and observe
on page 10 first.
The seat belt height adjuster makes it possible to adjust the routing of the
front seat belts in the area of the shoulder to the body size.
Press the seat belt height adjuster and move up or down in the desired di-
rection
» Fig.
7.
Then pull firmly on the belt to ensure that the seat belt height adjuster has
correctly locked in place.
Seat belt for the rear middle seat
Read and observe
on page 10 first.
The seat belt for the rear middle seat is anchored in the area of the boot on
the left side of the headliner.
Fasten
Pull the belt with both lock tongues out of the headliner mount.
Insert the lock tongue at the end of the belt into the belt buckle on the left
side until it is heard to lock in place.
Pull the second lock tongue, which is moveable on the seat belt, over the
chest and insert it into the belt buckle on the right side until it is heard to
lock in place.
Pull on the seat belt to check that both lock tongues are securely engaged in
the locks.
The belt tongues for the rear middle seat are shaped differently so that they
only fit into the correct belt buckle. If you are not able to insert a lock tongue
into the wrong belt lock you probably tried to put it into the wrong buckle.
Fig. 7
Front seat: Seat belt height ad-
juster
Release
Take off the safety belt in the reverse order to how you fasten it.
Guide the belt back by hand so that the webbing rolls up easily, the seat belt
is not twisted and the trim panel is not damaged.
WARNING
After releasing the seat belt hold it tight and let it slowly reel up until
both lock tongues lock into the headliner mount and are secured with a
magnet - there is a risk of injury.
Never unlock both lock tongues simultaneously.

Inertia reels and belt tensioners

Introduction
This chapter contains information on the following subjects:
Intertia reel
Belt tensioners
Intertia reel
Each seat belt is equipped with an inertia reel.
When pulling slowly on the seat belt, the belt can move freely. When pulling
sharply on the seat belt, the movement is locked by the inertia reel.
The belts also lock when full braking, when the car accelerates, when driving
downhill and when cornering.
WARNING
If the seat belt does not lock when pulling sharply on it, have it inspected
immediately by a specialist garage.
Belt tensioners
Safety for the driver and front passenger wearing their seat belts is enhanced
by the belt tensioners fitted to the inertia reels of the front three-point seat
belts.
The three-point seat belts are automatically tensioned in the event of a frontal
collision of a certain severity. The belt tensioners can also be deployed if the
seat belts are not fastened.
13
13
13
Seat belts

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents