Skoda 2014 Yeti Owner's Manual page 109

Depending on equipment fitted:
C
›
 Switching the windscreen heater on/off
›
 Switching on/off aux. heating (standard heating) on/off
Adjust the temperature for the right side
D
›
Lower temperature

›
Increase temperature

Control the seat heater on the front left seat

Control the seat heater on the front right seat

Adjust the blower speed

›
+ Increase speed
›
- Reduce speed
Switch the intensive windscreen heater on/off

Air flow to the windows

Air flow to the upper body

Air flow in the footwell

Automatic recirculation switch on or off

Switching the rear window heater on/off

Switching automatic mode on

Switching Climatronic system off

Switching the cooling system on/off

Switch the temperature setting in Dual mode on/off

After the cooling system is switched off, only the ventilation function remains
active whereby the minimum temperature that can be reached is the outside
temperature.
Setting temperature
The interior temperature for the left and right side can be set separately or to-
gether.
The temperature for both sides, is set by turning the knob
indicator light in the button  is not illuminated).
The temperature for the right side is adjusted by turning the knob
dicator light in the button  is lit).
The temperature for the left side is adjusted by turning the knob
cator light in the button  is lit).
The interior temperature can be set between +18 °C and +26 ℃. The interior
temperature is regulated automatically within this range.
» page 70
» page 109
» page 78
» page 78
» page 104
» page 70
»
» Fig. 111
A
D
(the indi-
A
If a temperature lower than +18 °C is selected, a blue symbol lights up at the
start of the numerical scale.
If a temperature higher than +26 °C is selected, a red symbol lights up at the
start of the numerical scale.
At both end positions, Climatronic runs at maximum cooling/heating output
and the temperature is automatically not regulated.
Controlling blower
The Climatronic system controls the blower stages automatically in line with
the interior temperature. However, the blower stages can be manually adap-
ted to suit your particular needs.
If the blower speed is reduced to a minimum, Climatronic is switched off.
The set blower speed is displayed above the symbol button  when the re-
spective number of indicator lights come on.
Automatic mode
The automatic mode is used in order to maintain a constant temperature and
to demist the windows in the interior of the car.
If the warning light in the top right corner of the button  lights up, the Cli-
matronic operates in "HIGH"-mode. The "HIGH" mode is the standard setting of
the Climatronic.
Upon pressing the  button again, the Climatronic switches to "LOW"-mode
and the indicator light in the top left corner lights up. The Climatronic uses on-
ly in this mode the lower blower speed. However taking into account the noise
level, this is more comfortable, yet be aware that the effectiveness of the air
conditioning system is reduced particularly if the vehicle is fully occupied.
By pressing the button  again, it is changed to "HIGH"-mode.
Automatic mode is switched off by pressing one of the buttons for the air dis-
tribution or by increasing/decreasing the blower speed. The temperature is
(the
nevertheless regulated.
(the in-
WARNING
Do not switch off the Climatronic system for longer than necessary.
■
Switch on the Climatronic system as soon as the windows mist up.
■
107
Heating and air conditioning
