Counter For Distance Driven; Display Of The Second Speed; Auto Check Control - Skoda 2014 Yeti Owner's Manual

Counter for distance driven


Read and observe on page 28 first.
Display » Fig. 26
Counter for distance travelled (trip)
A
Odometer
B
Counter for distance travelled (trip)
The counter indicates the distance you have driven since it was last reset - in
steps of 100 metres or 1/10 of a mile.
Reset counter for distance travelled (trip)
›
Press and hold the » Fig. 22
7
Odometer
The odometer indicates the total distance which the vehicle has been driven.
Note
If the second speed display is enabled on vehicles with a segment display, this
speed will be shown instead of the odometer.

Read and observe on page 28 first.
Use buttons and to set the clock
3 7
The choice to change the display (hours or minutes).
3
The change of the displayed value.
7
In vehicles equipped with the MAXI DOT display, it is also possible to set the
Time in the Time menu » page 45, Settings.
1)
For models with the speedometer in mph, the second speed is displayed in km/h.
Fig. 26
Display: MAXI DOT display / Seg-
ment Display
on page 28 button.
» Fig. 22 on page 28.

Display of the second speed


Read and observe on page 28 first.
The display can show the current speed in mph
This feature is provided for driving in countries with different speed units.
MAXI DOT display
The display of the second speed can be set in the Alt. speed dis. menu
item » page 45, Settings.
Segment display
›
Press key » Fig. 22 on page 28repeatedly, until the odometer display
3
flashes » page 31.
›
Press the key while the display flashes.
7
The second speed is displayed instead of the odometer.
The display of the second speed can be disabled in the same way.

Auto Check Control


Read and observe on page 28 first.
Vehicle condition
Certain functions of vehicle systems are checked continuously when the igni-
tion is switched on.
Some error messages and other information are displayed in the MAXI DOT
display. The messages are displayed simultaneously with the icons in the MAXI
DOT display or with the warning lights in the instrument cluster
Warning lights.
The menu item Vehicle status is shown in the main menu of the MAXI DOT
display whenever at least one fault message exists. After selecting this menu,
the first of the error messages is displayed.
Several error messages are shown on the display under the message e.g. 1/3.
This indicates that the first of a total of three error messages is being dis-
played.
.
1)
» page
Instruments and Indicator Lights
32,

31