System Overview; Windows Vista Operating System - Nortel BCM50 Documentation Update

Resources > Telephony Resources > Modules panel > Module type column > IP Trunks, then select the SIP
Settings tab)."
"When you set the value of the RFC2833 Dynamic Payload field, if the value is greater than 0, then this feature is
enabled. If the feature is enabled then DTMF digits are sent in RTP packets. For CS1000 Release 4.5 set the value
to 0."
"For detailed information on entering the values in this panel, see the Networking Configuration Guide (NN40020-
603)."
Page 91, Appendix A: Telephone features in normal and local mode
The bullet "IP Phone Key Expansion Module (KEM)" is changed to:
• "IP Phone Key Expansion Module (KEM) – The IP Phone KEM is supported on an SRG with normal mode
IP Phones. It does not function with local mode or test local mode IP Phones."

System Overview

Page 27, Windows Vista operating system
BCM applications for BCM50 support the following Vista versions: Windows Vista Business, Windows Vista
Ultimate, and Windows Vista Enterprise. BCM applications support both 32-bit and 64-bit versions of Windows
Vista, except for the following limitations:
• The CTE TAPI option is not supported by the 64-bit version of Windows Vista (x64).
• Personal Call Manager is not supported by the 64-bit version of Windows Vista (x64).
• Reporting for Contact Center is not supported by the 64-bit version of Windows Vista operating systems.
• CallPilot Desktop Messaging 4.0 does not support Groupwise 7.x on Windows Vista operating systems.
• The IP SoftPhone 2050 is not supported by the 64-bit version of Windows Vista operating systems.
• VPN client is not supported by the 64-bit version of Windows Vista operating systems.
Page 27, Windows Vista operating system
The following sentences are removed from this section:
"Most applications that run on Windows XP also work on Windows Vista with no changes. Of the applications that
do not run on Windows Vista, the majority can run with the help of either a Compatibility Layer (a setting that
provides some Windows XP functions to the application) or an Elevation Layer (a setting that runs the application
with administrator privileges)."
Page 27, Windows Vista operating system
The following table includes the following new rows:
BCM50 application
ipView Software Wallboard Setup and Operation Guide
Reporting for Contact Center
IP Softphone 2050
Personal Call Manager
LAN CTE TAPI Service Provider
VPN Client
Page 28, Unified Messaging Client exceptions
CallPilot Desktop Messaging 4.0 does not support Groupwise 7.x on Vista. You can download Windows Help that
is used by CallPilot help from the Microsoft Download Center. The Desktop Messaging installation can appear to
BCM50 3.0 Documentation Update
Vista compatible
Yes
Yes
Yes (32-bit version only)
Yes (32-bit version only)
Yes (32-bit version only)
Yes (32-bit version only)
19
NN40020-400