Mac Limit - Interlogix GE-DS-242-PoE User Manual

Chapter 6: Command Line Interface

MAC limit

MAC limit allows users to set a maximum number of MAC addresses to be stored
in the MAC address table. The MAC addresses chosen to be stored in MAC
address table is the result of first-come-first-save policy. Once a MAC address is
stored in the MAC address table, it stays in until it is aged out. When an
"opening" is available, the switch stored the first new MAC address it sees in that
opening. All packets from MAC addresses not in the MAC address table should
be blocked.
User can configure the MAC limit setting and fill in the new value.
mac-limit
Description:
Enable MAC limit.
no mac-limit
Description:
Disable MAC limit.
Mac-limit
Description:
Set port MAC limit value, 0 to turn off MAC limit of port.
Syntax:
Mac-limit <port-list> <1-64>
show mac-limit
Description:
Show MAC limit information, including MAC limit enable/disable, per-port MAC
limit setting.
162 GE-DS-242-PoE Managed Ethernet Switch User Manual