Table of Contents
Advertisement
•
Switch 2 configuration
6. Set System Priority of the trunk group. For example: 32768.
7. Select a trunk group ID by pull down the drop-down menu bar.
8. Enable LACP.
9. Include the member ports by clicking the Add button after selecting the
port number and the column field of Work Ports changes automatically.
Figure 4-44: Switch 2 configuration interface
10. Click on the tab of Aggregator Information to check the trunked group
information as the illustration shown above after the two switches have
been configured.
GE-DS-242-PoE Managed Ethernet Switch User Manual
Chapter 4: Console Management
89
Advertisement
Table of Contents
