Binding - Interlogix GE-DS-242-PoE User Manual

Chapter 6: Command Line Interface

Binding

Let device that has specific IP address and MAC address can use network. We
can set specific IP address, MAC address, VLAN id and port id to bind, and
device can cross switch if all conditions match.
SIP/SMAC binding commands
bind
Description:
Enable binding function.
no bind
Description:
Disable binding function.
no bind
Description:
Delete Binding group.
Syntax:
no bind <1-220>
Parameters:
<1-220> specifies the group id.
e.g. no bind 1
190 GE-DS-242-PoE Managed Ethernet Switch User Manual