Hardware Description - Interlogix GE-DS-242-PoE User Manual

Chapter 2: Installation

Hardware Description

Switch Front Panel
The Switches front panel provides a simple interface for monitoring the Managed
Switch. Figure 2-1 shows the front panel of the Managed Switch.
Figure 2-1: GE-DS-242-PoE Switch front panel
10/100Mbps TP Interface
Port-1~Port-24: 10/100Base-TX Copper, RJ-45 Twist-Pair: Up to 100 meters.
Gigabit TP Interface
Port-25, Port-26: 10/100/1000Base-T Copper, RJ-45 Twist-Pair: Up to 100
meters.
Gigabit SFP Slots
Port-25, Port-26: 1000Base-SX/LX mini-GBIC slot, SFP (Small Form-Factor
Pluggable) transceiver module: from 550 meters (Multi-mode fiber), up to
10/30/50/70/120 kilometers (Single-mode fiber).
Console Port
The console port is a DB9, RS-232 male serial port connector. It is an interface
for connecting a terminal directly. Through the console port, it provides rich
diagnostic information includes IP Address setting, factory reset, port
management, link status and system setting. Users may use the attached RS-
232 cable in the package and connect to the console port on the device. After the
connection, users may run any terminal emulation program (Hyper Terminal,
ProComm Plus, Telix, Winterm and so on) to enter the device's startup screen.
12 GE-DS-242-PoE Managed Ethernet Switch User Manual